THE COBRA SYSTEM - The Best Heated CTA on the market today

TYPICAL INSTALLATION

SCHEMATIC

You can view or print a schematic of the Cobra System® in PDF format. - Click here.

CAUTION

Both Cobra Applications need to be filled within 1/2" of the top with a fifty-fifty mix of Glycol before any electrical connections are made. If not, the heating element in the tank will pre-maturally burn out.

HERE'S HOW ECONOMICAL (with simplicity) THE COBRA SYSTEM WORKS:
The Cobra System heats your wheel & tire cleaners right at the point of application every time. Wheel and tire chemicals coming from your hydrominder are at ambient temperature until they reach the Cobra, which then sprays heated wheel and tire chemicals at the point of application. This new innovation ensures that every vehicle gets a hot shot no matter how many cars per hour you run, and will not freeze up in cold weather conditions. Thereby only costing $1.43 per day to operate.

For more information about "The Cobra System®", please feel free to call us at 724-745-7148.

Send Email: thecobrasystem@comcast.net

Constant and consistent heat right at the nozzle!
Easy to install plug-n-play heated C.T.A. system.

COBRA TIP FOR GETTING CLEANER WHEELS & TIRES

1. No manual prepping. Keeping wheels and tires dry.
2. Prevent pre soak spraying on the wheels.
3. Correct chemical ratio.
4. Spray pattern should be concentrated on wheel.
5. Allow wheel and tire chemical to stay concentrated as long as possible
6. Wheel blaster set 20 to 40 ft from Cobra's if possible
7. Run alkaline not acidic on lower brushes
8. 90psi at air diaphragm pump (minimum)